Indoor Air Quality & Mold

27Apr 2017

Why the indoor air quality of dialysis centers and hospitals can’t be neglected.

Indoor Air QualityIndoor air quality is a major concern for dialysis centers and hospitals around the country. Dialysis and medical centers are especially vulnerable to mold, which compromises the integrity of air quality. But what makes dialysis centers and hospitals so prone to mold growth, and what does that mean for indoor air quality?

If you help operate a dialysis center or a hospital, you can’t afford to overlook the threat that mold poses for your air quality. Here are some of the reasons why your center is vulnerable to mold and why it matters:

  • Vulnerability: There are quite a few reasons why dialysis centers and hospitals are prone to mold infestations…
    • Dialysis centers: Dialysis centers can harbor multiple mold infestations if they are not properly maintained. Since dialysis centers use reverse osmosis water therapy, moisture is an integral part of the daily practice of dialysis centers. And, since mold only needs moisture in order to thrive, improperly maintained dialysis centers can be breeding grounds for mold.
    • Hospitals and medical centers: There is plenty of moisture to go around in hospitals and medical centers, as well. Combine the prevalence of moisture with the combination of all sorts of bacteria and chemicals, and you have a recipe for mold infestation and, as a result, poor indoor air quality.
  • Health: Poor indoor air quality can be detrimental to health, especially for those going through the volatile process of recovery. Airborne mold can cause allergic reactions, such as sneezing, coughing, and bodily irritation. When people are trying to overcome an illness or recover from surgery, the air must be as clean as possible.
  • More mold: Indoor air quality problems can lead to serious mold infestations. If the air quality is not properly regulated, then mold can infest countless surfaces in the building. This unfortunate fact was recently highlighted in Pittsburgh, where two University of Pittsburgh Medical Center hospitals have experienced serious and dangerous mold infestations. A review by the CDC indicates that the mold infestation was a result of poor air quality since dust and mold spores most likely entered the medical centers through the ventilation.

What You Can Do About Your Indoor Air Quality

There are plenty of actions that you can take to make sure that your center meets the highest indoor air quality standards. If you would like to read more about how you can take control and make sure that your air is clean, then check out how you can improve your indoor air quality with these 5 tips.

If you would like to seek the counsel of skilled professionals about your indoor air quality, then contact us at Advanced Mold Diagnostics. We have years of experience of assessing and improving air quality, and we can put your worries to rest as you breathe fresh, clean air. Call us today at 1-800-642-8305.


Related Tags: Medical Indoor Air Quality | Mold Air Quality

01May 2015

Advanced Mold Diagnostics experts show you how to improve indoor air quality in your home or building.

Home and office owners are often concerned with how to improve indoor air quality in their buildings.  For some, this concern is based in the wellness of someone who lives and works there; poor air quality can be especially difficult for those with asthma or other similar respiratory conditions.  Other questions about indoor air quality range from unpleasant odors to legal obligations.  At Advanced Mold Diagnostics, we hear all of these concerns and more!  So, we are here to help you get started addressing the air quality in your home or office.

So, if you are wondering how to improve indoor air quality, get started with these five simple tips.  As you try them, you will begin to figure out which issues have had the greatest effect on your particular indoor air quality and can continue working towards improvement!

  • how to improve indoor air qualityMake Spring Cleaning A Weekly Task.  So often, a deep, thorough cleaning is put off indefinitely or done only as a quarterly ritual.  However, regular cleaning will go a long way to reduce allergens and irritants in the air.  Just make sure that you are using nontoxic and unscented cleaning products to avoid adding potentially harmful vapors.
  • Improve Your Building’s Circulation.  Although you may be tempted to keep the windows shut when the weather is still cool, opening the windows for a few minutes to let in fresh air can make a bit difference.  This is especially true when you are cleaning, cooking, or painting!  Using ceiling and exhaust fans regularly can also help keep fresh air moving through.
  • Give Your Filters Some TLC.  When was the last time you replaced–or even checked–the filters in your heating and cooling system?  These filters can make a huge impact in reducing the amount of contaminants in the air, but only if they are well maintained to continue working effectively.
  • Deter Mold With Proper Ventilation.  Often, mold and mildew are major parts of property owners’ concerns when it comes to indoor air quality.  Because these fungi grow best where there is an accumulation of moisture, make sure that you have proper ventilation in areas that are frequently damp, such as bathrooms.
  • Call In The Professionals.  If you have major concerns about the indoor air quality of your home or building, calling in for a professional assessment may be the best step.  These experts can use the latest technology to assess your air quality and provide you with useful information about what contaminants may be present (as well as what might be causing them.)

For more information about how to improve indoor air quality in your property, or to talk to an Indoor Air Quality specialist, contact Advanced Mold Diagnostics today at 1.610.328-4350.

05Mar 2015

Advanced Mold Diagnostics can help you make sure that your home or building meets important indoor air quality standards.

How often do you think about the air quality in your home or building?  The way you answer that question can sometimes be an important indicator of whether or not you are meeting indoor air quality standards.  When we measure indoor air quality at Advanced Mold Diagnostics, we consider physical and chemical characteristics and airborne constituents of air in buildings, with a special concern for the impact it has on occupant health and comfort.  So, if you regularly feel concerned that your health or comfort has been affected, it may be time to call professionals for an assessment.

indoor air quality standards

Do You Know Your Indoor Air Quality Standards?

When it comes to actually knowing the relevant indoor air quality standards, most home and building owners don’t know where to start.  That’s okay!  Your main focus is probably on running the household or business that operates in that building, not worrying about the chemical characteristics of the air.  However, because those minute characteristics and constituents of the air have the potential to affect those who live or work in that space, it is important to get the help of someone who has experience in this area.


This is where Advanced Mold Diagnostics can help.  With over 25 years of applied experience in a number of related fields, including indoor air quality, we are well versed in the latest indoor air quality standards.  Furthermore, we have the expertise and the equipment necessary to test and resolve any potential issues in your home or building.


How Can We Help You?

At Advanced Mold Diagnostics, we believe that this is one of the most important questions.  That’s why, when you first call us with concerns about the air quality in your home or building, we take the time to understand your situation.  Through our over the phone screening process, we will help you decide which service is best suited to your particular needs.  If we do recommend that you get an Indoor Air Quality Assessment, you can expect a scenario like the following.


An AMD representative will arrive at your home or building and initially go over useful information with you about mold, mold testing, and mold remediation.  Next, we’ll turn the conversation to you and gather important information about your situation, including medical history and incidents that may have led to mold growth.  We’ll also ask you about your particular areas of concern.  


While our diagnostic equipment warms up, we’ll do an outdoor inspection for a variety of issues, including those which might permeate inside.  Then, your indoor inspection will provide a comprehensive assessment of your home or building, which may include steps such as visual inspection, laser particle counter readings, moisture meters, thermal imaging of interior wall cavities, and more.  Once both indoor and outdoor inspections are complete, your AMD representative may also talk with you about mold sampling protocols.


With the detailed information you receive from your assessment, you will not only get an idea about how your home or building is meeting air quality standards, but also what should be done to fix any problems which may be occurring.  We will work with you throughout the entire process, helping you understand your situation and your options.
For more information about how Advanced Mold Diagnostics can help you assess and improve the indoor air quality of your home or business, contact us today at 1-610-328-4350.

Indoor Air Quality Standards | Indoor Air Quality Standard

15Aug 2014

Advanced Mold Diagnostics, LLC is an environmental consulting company located in Broomall, Pennsylvania.

Finding mold in your basement is certainly not uncommon, and yet, discovering it can still leave you with a somewhat queasy feeling. It looks and smells unpleasant and may seem like a challenge to remove entirely. Instead of simply cleaning tips, which only reach the surface of the problem, you need to know how to kill mold in your basement once and for all. Fortunately, at Advanced Mold Diagnostics, our experts offer solutions for basement mold problems on every level.

How to Kill Mold in Your Basement With Household Products

how to kill mold in your basementIf the mold in your basement is only affecting a small area, less than 5 feet, and no one in your household is at risk for health complications due to mold, you may be able to resolve the problem with simple household products. The extent to which this is effective will depend, in part, on what sorts of surfaces the mold is growing on. If it has appeared on non-porous surfaces like a tile floor or metal pipes, start by using soap and hot water. Then, a bleach-based cleaning product can be used to fully kill the mold. For a chemical-free solution, you can also try white vinegar. Whatever cleaning product you use, make sure to completely dry the washed area when you are finished to prevent any future growth.

If the affected surfaces are porous, such as fabric on furniture, cardboard boxes, or even insulation, you will need to try a different approach. Some materials, like fabrics, can be washed with hot water and soap. Others, however, you may have to simply discard.

When to Call in the Professionals

Often, when you are wondering how to kill mold in your basement, it has spread to an area larger than 5 square feet. This would be one case in which you should call a professional mold remediation service, such as Advanced Mold Diagnostics. Even if you don’t know the full extent of the mold growth, but suspect it has affected the walls, insulation, or other porous surfaces, it is important to get a professional mold inspection. At AMD, not only do we know how to kill mold in your basement, but we also know where and how to look to ensure that we get it all, for good.

How to Prevent Further Basement Mold Growth

Another important aspect of professional mold remediation is future prevention. Mold grows in areas where moisture accumulates, and in basements, this can be the result of flooding, leaks, or even uncontrolled humidity. Advanced Mold Diagnostics can help you waterproof your basement against future moisture damage and potential mold growth, ensuring that your home stays clean and safe for years to come.

15Jul 2014

Maintaining a safe, healthy, and clean workplace is imperative for business owners of any size.  However, when moisture sneaks in and remains undetected, mold can begin to grow. There are over 100,000 species of mold in the world. Among these, many do not pose a dramatic health hazard, but even mild mold can cause symptoms in those who have preexisting conditions that make them sensitive to mold.  Add to that the potential for mold to spread, and to cause an unpleasant odor in your workplace, it becomes clear something has to be done about it; it may be time to call a mold removal contractor for business testing or remediation.

Signs of Mold

The following signs might be a good indication that you have mold growing in your workplace:mold removal contractor for business

  • Moldy smell, especially one that gets worse with the heat or air condition on
  • White and gauzy, fuzzy looking growth
  • Small, clustered black spots
  • Orange, pink, or purple discoloration behind vinyl wallpaper
  • Peeling, bubbles, or cracking in wallpaper or stucco
  • Signs of previous or present water damage

Who To Contact

If you have noticed any of the above signs, or an increase of mold-allergy symptoms, you should consider calling a mold removal contractor for business, to get an inspection.  Some mold can be dealt with using simple do-it yourself remedies.  However, when it comes to the integrity of your business and ensuring that you fully remove all mold, it is important to get professional advice and possible assistance.

The Mold Removal Contractor for Businesses Like Yours

Advanced Mold Diagnostics is a full service mold testing and mold company.  With over 25 years of experience in mold remediation and related fields, they can do more than just wipe away the visible mold in your business.  Instead, they can find the source of your mold problem, work to make sure that it does not recur, and return your building to its original condition.

What to Expect When You Call

When you call a mold removal contractor for business inspection and remediation, you should not immediately receive scare tactics attached to a sales pitch.  Many molds pose little danger and can be easily removed, so a good mold remediation service will begin by gathering as much information as possible to determine the extent of your problem.  If the problem can be dealt with on your own, they will offer advice about the best way to protect your property and employees.

If it sounds as though your business requires professional assistance, they will schedule an on-site testing.  From there, they will determine what type of remediation and restoration is necessary and work quickly and professionally to resolve your business’s mold problem.

Advanced Mold Diagnostics follows the above steps when you reach out to us about a potential mold problem. For more information, contact Advanced Mold Diagnostics today!

15Jul 2014

Advanced Mold Diagnostics, LLC is an environmental consulting company located in Broomall, Pennsylvania.

Do you suspect that you may have a mold issue in your home? And have you been wondering how to kill mold in your house? Right off the bat, the most important thing to establish is whether the mold growth requires professional service or can be taken care of with a do-it-yourself solution. To help make this determination, fill out this free checklist. Once you have reached that determination, there are multiple options for each type of solution. Here’s a quick guide to the variety of methods of how to kill mold in your house.

How to Kill Mold In Your House: DIY vs. Professional

DIY Remedies:

If the mold growth has not surpassed a small area (less than 5 square feet) and you have no at-risk individuals in your residence, a do-it-yourself remedy may suffice. Once you have determined that you are able to clean it up yourself, make use of these methods depending on the type of to kill mold in your house

  • Non-Porous Surfaces (countertops, tile, glass, stone, etc.)
    •  Scrub the area with hot water and soap, which makes a very effective biocide.
    •   Use bleach-based products with the chemical compound Sodium hypochlorite.
    • After cleaning, be sure to dry the area immediately and fully to prevent re-growth.
  • Porous Surfaces (clothes, fabrics, upholstery, furniture, etc.)
    •  If the mold growth is visible, seriously consider discarding the item because you cannot be sure that you will remove all of the mold. In this case, you’re better off erring on the side of caution.
    • For any porous material that can handle such treatment, wash with hot water and soap.

Professional Service:

Even if you know how to kill mold in your house, your mold issue might be beyond your control. If you have determined that your mold issue cannot be taken care of with a DIY treatment, it’s time to call a mold removal company to receive the necessary professional treatment. These services might include air quality investigations, mold testing, mold inspection, mold remediation, stucco inspection or repair, or waterproofing.

If you’re wondering how to kill mold in your house, Advanced Mold Diagnostics has the answer that is right for you. Whether you need professional treatment or can tackle your mold issues yourself, Advanced Mold Diagnostics is happy to help any step along the way. Our experts are happy to help you with your DIY remedies and are also equipped to provide the professional service that is often necessary. The variety of services, certifications, and years of experience under our belt make us a mold remediation company you can trust. For more information, contact us today!

25Jun 2014

Mold Doctors for Kitchen Mold Removal in Philadelphia

If you are in need of kitchen mold removal in Philadelphia, you might be wondering how to receive the necessary advice or services. First, think about what you do when you’ve recognized any other type of issue that is in need of attention. When you are sick or have a health concern, you contact a doctor for advice or treatment. Similarly, if you’ve recognized your need for kitchen mold removal in Philly, you will want to become acquainted with a mold removal company. So let’s think of a mold removal company as your “mold doctor.”

3 Steps for Kitchen Mold Removal in Philadelphia

1.    Call a specialistkitchen mold removal in philadelphia

As you probably know, mold can be potentially hazardous for your home and for those who dwell in it. Therefore, you don’t want any average Joe trying to fix your mold problem. You need a specialist. If you have identified a personal health issue and do not have the medical knowledge or cannot perform the necessary treatment to remedy the issue yourself, you call a doctor to receive advice or treatment. Similarly, if you’ve identified a mold issue in your home, you most likely do not know how to completely take care of the problem in the most efficient way. You will need to contact a trusted mold specialist so that they can properly inspect the mold growth in your home and advise you on the best direction to go from there.

2.    Get advice

Once a specialist has tested or inspected your kitchen and has properly diagnosed your mold problem as well as the root of the mold growth, your mold removal journey could go one of two ways. The first would be to receive advice on how to fix the mold issue yourself. If you catch your mold in the early stages of its growth and it is still a mild issue, a do-it-yourself remedy may very well suffice. However, you will still need a specialist to determine whether the mold growth can be treated by you and to give you the accurate advice on how to treat it. This stage would be similar to when you call or visit your doctor to find out that you can fix your health problem with an over-the-counter medicine from your local drugstore.

3.    Receive removal service

If your mold problem is more severe , you will need to receive professional mold removal services. If the specialist has determined that your mold is beyond your personal control, a professional mold removal service will be necessary. This service could include remediation, structure repair, waterproofing, or water removal among other things. This stage is similar to when you call or visit your doctor to find out that your health problem needs a more-involved treatment such as surgery — something you can’t do at home.

Just as you want a proven, reliable doctor to take care of all your health concerns, you will want an experienced and trusted mold removal company for your kitchen mold removal in Philadelphia. That’s what you’ll get from Advanced Mold Diagnostics. AMD’s trusted specialists are covered by numerous certifications and expertise in a wide variety of related fields. They put their customers first and are happy to give DIY advice when it is appropriate.

If you do need professional services, AMD offers all the services necessary to take care of mold growth and the source of the mold growth. These services are backed by decades of experience and rave reviews from our customers. If you need kitchen mold removal in Philadelphia, contact us today!

18Jun 2014

If you suspect that mold is growing in your home or business, whether you have visible evidence of mold or only a faint smell of mold, acting promptly is important. This prompt action can help prevent the infestation from spreading further, which can prevent you from a whole set of problems, from allergic reactions to significant financial losses due to property damage. Deciding which course of action to take is not always so simple, especially if you have not heard a straightforward response to your question, “What is Mold Removal?” Understanding the full scope of the problem of mold growth is important for preventing the problem from worsening or reoccurring after your mold cleanup is finished.

The Basics: What is Mold?

Molds are several species of fungi that reproduce most effectively in damp and humid environments, both indoors and outdoors, by making spores. These spores can survive dry conditions and begin growing once they are carried (usually by air) into a moist area. Common types of molds that grow in homes and other buildings are: Cladosporium, Penicillium, Alternaria, and Aspergillus. For some people, exposure to molds can result in allergic reactions and respiratory issues (especially those with preexisting sensitivity to mold or other breathing difficulties).

What is Mold Removal?


Mold removal, also known as mold remediation, is a process of thoroughly cleaning areas of a building where mold has been discovered. Because this typically occurs where excess moisture is present, the areas inside and around basements and bathrooms are the most common sites of mold growth; however, mold can be a problem anywhere in the home, especially in a warm and humid climate. A good mold diagnostic and remediation company will immediately look for the root cause of a mold problem, which is often water damage, in addition to any visible and hidden mold growth. Simply cleaning the area is only part of a comprehensive remediation process; often, leaks need to be fixed and repairs to walls and ceilings become necessary.

More Than Just Cleaning and Restoration

Rather than asking, “What is mold removal or remediation?”, a conscientious home or business owner should ask, “How can I prevent any appearance or recurrence of mold in my building?” Maintaining an environment that is not conducive to mold growth may require some extra effort and expenses, but these are small prices to pay when you consider the benefits to your health and your bottom line. Using a dehumidifier, adding mold inhibitors to your paint, ensuring properly functioning ventilation, and drying wet carpet (or avoiding carpeting altogether in basements) are a few of the basic steps to mold prevention.

Advanced Mold Diagnostics serves the Greater Philadelphia Area in mold inspection, testing, and mold removal services. One of the most important things we do is to advise our customers in steps to prevent mold from returning to spaces that are most susceptible to mold growth. We also teach people to clean up their own mold infestations, as long as the problem has not become too widespread.

Contact us if you suspect that mold is growing in your home or place of business, or if you would like more information on how to prevent a mold infestation.

12Jun 2014

Residential Mold Removal Services And Other Potential Solutions – Advanced Mold Diagnostics

Musty smells.  Visible signs of growth, perhaps black spots or pale fuzz.  Increased congestion in family members with asthma.  You’ve read and identified the signs and discovered that your home has a mold problem.  Perhaps it’s small, just in the beginning stages, or maybe you realize you’ve let it go on longer than it should have.  Whatever the case, you know that it’s time to find a solution to improve the wellbeing of your home and family members.

Depending on the type of mold you have, and the extent of its growth, you may find success with a variety of approaches.  Some mold can be remediated with a simple, at-home method.  Others require the help of residential mold removal services.  In either case, the specialists at Advanced Mold Diagnostics are there to help determine the right solution for your home.

At Home Remedies


Although the media often paints the picture that mold in the home is a true horror story, the truth is that many mold problems can be dealt with using straightforward, at-home remedies.  If your mold growth is minimal, you can begin by simply using soap and hot water to scrub off surface growth.  If mold is growing on non-porous surfaces, chlorine bleach both disinfects and sterilizes, effectively killing the mold.  Simply mix one cup of the bleach in a gallon of water and spray it onto the surface.  Of course, many porous surfaces in the home can also be the site of mold growth.  For some of these, hydrogen peroxide offers an effective solution.  White distilled vinegar can also treat the smell of and effectively kill 82% of home mold growth.

Residential Mold Removal Services

Of course, not all mold can be fully remediated with the above approaches.  When it comes to more serious concerns, and confidently knowing which is which, it may be time to call in residential mold removal services.  In addition to thorough removal, such services can also help you restore your building to its normal condition, fully remediating any damage done.  Because the initial cause of mold was likely a moisture problem, your professional mold removal service should also work to resolve the cracks or leaks that led to the problem in the first place.

Advanced Mold Diagnostics

Among Pennsylvania’s residential mold removal services, Advanced Mold Diagnostics stands out as a strong partner in your fight against mold.  Because they begin with inspection and, if necessary, testing, you won’t have to pay for remediation services you could have done yourself.  And if remediation is necessary, you can trust in over 25 years of applied experience from the AMD team.

For more information about how Advanced Mold Diagnostics can help you with mold removal, contact us today.

12Jun 2014

Advanced Mold Diagnostics, LLC is an environmental consulting company located in Broomall, Pennsylvania.

Mold growth is inevitable in most homes. Whether you leave your bread out too long and it starts to become a science project or you have a more serious moisture issue that is causing mold to grow on the surfaces of your home, it is a substance that no one wants creeping and crawling all over their things. So, how do you know you have enough mold to warrant the use of residential mold removal services? Here are a few telltale signs that will help you decide if it is the right time for you to call on a professional mold removal service.

3 Signs That You Should Call the Residential Mold Removal Services

1)   You Have Excess Moisture in Your HomeResidential Mold Removal Services

You may be asking yourself what having excess moisture means? Having excess moisture means that the humidity level of your home is high due to the inability of moisture to escape. This is especially common in basements where there are no cracks or crevices to the outside world that the air can escape from. Chances are that if you aren’t taking the proper steps to keep the humidity level in your home at a low level, you might be developing a mold problem.

In many cases when there is excess moisture in the home, mold is growing from the inside of the home, out. This  means  that you may not even see the mold growth that  you are suffering from until it becomes a serious problem. Sure, there are quick fixes to get rid of this mold temporarily, but in order to say goodbye to the mold caused by excess moisture for good, you need to employ residential mold removal services to take care of the problem.

2)   You Have Experienced a Disaster Causing Mold Growth

Those of us who live in areas that are frequently affected by natural disasters that result in flooding, hearing about residential mold growth caused by standing water is very common. But, did you know that mold can start growing in homes with severe water damage within 48 hours of the of the excess waters arrival? This means that in order to avoid a more serious, and more costly problem in the future, you need to call upon residential mold removal services to take care of the cleanup once the clouds pass on, or the water recedes.

3)   That One Spot Just Keeps Coming Back

For many homeowners, especially those who live in homes that are slightly aged, it is common to notice a few dark spots here and there. These spots may be  on your ceiling or wall in your bathroom, kitchen, or other rooms. These spots are easy to remove on your own, generally speaking, and can generally be knocked out with a home remedy or two. But what happens when you hit the spot with some white wine vinegar to kill off the growth, and a few weeks later the spot is right back where it was, dark and alive as ever?

If you have recurring dark spots, you could be facing a more serious mold problem than you think. You may be in need of  residential mold removal services from a professional to not only get rid of the mold growth, but also determine where the mold is coming from, and stop it at the source.

Please remember there is no mold growth that is too small for a professional’s opinion. Residential mold growth is unpleasant and can potentially be dangerous to you and your family after prolonged exposure, which is why it is crucial for you to call a professional as soon as possible to prevent long term effects.

If you find that your home is suffering from abnormal mold growth, it is time to call a professional for residential mold removal services. A professional will be able to remove the mold and tell you where the mold is coming from. They will also ensure that the mold does not spread or come back if their services are done properly meaning that once the mold is gone, you get back your peace of mind, and can get back to doing the things that you love the most in your home such as entertaining.